A Shop To Wrench On Your Bike
Thursday, August 22nd, 2019
King Browne operates a shop where you can come work on your own bike.
Sometimes I get tipped off to things going on right here at home by national magazines. This is one of those times. American Motorcyclist, the magazine of the American Motorcyclist Association, has a group of articles in the latest issue under the overall headline, “Get Experienced.” The lead article was about Jen Wyse, who moved to Colorado from New York and got involved with what is called a “community motorcycle garage.”
The shop in question is Moto Works Denver, at 2000 S. Cherokee. It is run by King Browne, who you see there in the photo. King runs a typical metric-only shop with a twist: There is a do-it-yourself corner with a couple lifts where you can use the shop’s tools and work on your own bike. The DIY fee is either $50 a day or $150 for one month. Storage is also available. The shop is set up for mechanical work, not so much things such as fabrication. If you want to build a bike from scratch, including welding and painting, this is not your place. If you want to do a valve job, a tune-up, or replace the engine, it is.
Walking into the shop I noted all kinds of older bikes, including a Honda CB1000 Custom, the big brother to the CB750 Custom I had arrived on. Aurora Honda fired me as a customer a long time ago because they don’t want to work on older bikes. That’s where shops like this one come in. You can pay King to work on your bike or you can pay less and work on it yourself.
Make no mistake, if you chose the DIY route you are going to need to do nearly all the work yourself. King and his staff don’t have time to babysit you and answer every question that you should already have found answers to by reading the shop guide for your bike and watching videos on YouTube. But if something in the manual is unclear they will help you clarify the matter and they’ll offer pointers and advice, plus help out if an extra set of hands is needed.
The clientele skews mostly younger, King explains, because most older guys who have an inclination to wrench already have their own spaces and their own tools. Younger guys, on the other hand, live in condos with no garage and they have no tools. What they do have is enthusiasm and the desire to work on their machines.
If this sounds like the sort of thing you would like to use, head on down to 2000 S. Cherokee. If it sounds like a business you would like to be involved in, hustle on down. King is looking for a partner.
When he opened the shop a couple years ago, he explains, he had a partner and figured between the two of them they could make it work and still have time to have lives. However, after only three months the partner pulled out. Although King has employees, he runs the business by himself. If you would like to join him as a partner he would welcome you, and if you would like to ultimately buy the operation that could be a possibility as well.
Either way, if you want to get greasy and feel the pride of having wrenched your own bike, this is your chance. I may just have to do this a bit myself, although King says it is best to use the shop in the winter rather than in the midst of the riding season. That gives me time to ponder whether I want to take on a valve job on the CB. Of course, if I do, you’ll be able to read all about it right here.
Biker Quote for Today
I guess the Harley crowd took offense at the old rice burner I rode in their midst. — Charles A Johnson
