New Tire, Chain, Sprockets, Air Filter for the V-Strom
Ron Coleman putting the new chain and sprockets on my V-Strom.
I consider myself very fortunate to know and deal with motorcycling people who are a lot more adept at some things than I am. Such is the case with Ron Coleman, who runs Western Dual Sport Motorcycle Adventures.
It’s not that I don’t have a mechanical bent, but I do not have the tools to even try doing some of the work it takes to keep a motorcycle running. Ron recently helped me get a new rear tire on the V-Strom as well as a new chain and sprockets. He also replaced the air filter. Out of all these tasks, the only one I could conceivably do myself is the air filter. Having seen it done twice now I’m actually thinking I could do it.
For the tire, forget it. I don’t have a tire changing machine and I know from experience how tough it is to change a tire without one. Ron does and he made short work of getting this new Shinko on. Now I have matching Shinkos front and rear and can’t wait to get out in the dirt and see how it feels. I was on the dirt a little when we went to the Black Hills in July and the bike was very unstable. When you figure that I had a nearly bald street tire on the rear it’s no surprise. Now I’ve got real rubber back there.
The one thing I did see from the tire change was how to take the wheel off the bike and put it back on. I might be able to do that, which could be a good thing if it ever came to needing to take the wheel and tire somewhere to have someone else do the tire replacement.
And there is no way I’d ever be able to replace the chain and sprockets myself. For one thing, getting the old chain off entailed using a grinder to cut away the heads of two pins in the chain, so as to open up the loop. Replacing the sprockets was pretty straightforward but even then the fact that Ron had the right tools made the job so much easier than it might have been. Putting the new chain on also required cutting away an extra link and then using a specific tool to pop in the connecting links and peen (as in ballpeen hammer, I presume) them to spread the ends so they don’t slip out.
I watch this all going on and I see exactly why I generally pay someone else to do it. I don’t mind getting dirty, and I’ve always enjoyed taking things apart and fixing them and putting them back together, but this is just out of my league.
To get to the air filter it is necessary on this bike to remove the gas tank. That stopped me once in the past when I was going to replace the spark plugs on my Concours. I had no idea how to remove the tank. I still don’t.
On the V-Strom it just takes removing a few screws and then raising the tank up on a hinge while disconnecting the fuel line. Best to do this when you do not have a full tank–all that gas is heavy. So you lift the tank off and then take four or five screws out to remove the housing and presto–there’s the air filter. Lift it off, put a new one in, replace the housing and drop the tank back on. Put the screws back in and voila!
It really is good to know people like Ron. I’m very indebted to him for everything he has helped me with on this V-Strom. Ron knows V-Stroms really well because he has several that he rents along with a bunch of other bikes, including his latest, a Yamaha Super Tenere. After the work was all done we went for a ride and I rode the Tenere. I’ll tell you about that shortly.
Biker Quote for Today
There is no physical training regimen so strict that it can’t be undermined by a rigorous program of deferred motorcycle maintenance.
Tags: changing motorcycle tire
