Passes & Canyons Blog

A big Oopsie! award goes out this week to Kawasaki. It seems the producer of the super hot Ninja sportbikes had a bit of a design or production glitch.

The Ninja ZX-10R is the 998cc member of the Ninja family and a popular bike. However, if you want one of these babies just at this moment you’re out of luck. In fact if you already bought one you’re out of luck.

Kawasaki announced a couple days ago that it was putting a “technical hold” on all 2011 ZX-10Rs and telling dealers to return any unsold models to the company’s warehouses. What’s more, they are contacting all buyers who have already taken delivery to reimburse their purchases and take the bikes back. That’s right, you bought that, and paid for it, but you can’t keep it. We’re taking it back.

Of course, after whatever fixes that are needed are made, the bikes will be distributed again to dealers and they’ll go on sale. Buyers, on the other hand, are apparently not guaranteed to get “their” bike back, even if they had already done some customizing. Instead, they will “be among the first to have the option of receiving a new unit once the technical hold has been lifted.”

In its statement about the technical hold, Kawasaki was not specific about the nature of the issue. They did say that the ZX-10R will only go back on sale once “Kawasaki is 100 percent confident they reflect company standards for this highly technical, race-bred machine.”

OK, and so here’s a question: What’s the difference between a “technical hold” and a “recall”?

Biker Quote for Today

It’s not the bike so much as it’s the rider. Put the stock pistons back in the bike and quit messing with shit you don’t understand.

Well, OK, not quite. You might think that a rally for the folks who ride a bike that has been in production for nearly 20 years with only minor changes — very much like the old Volkswagen Beetle — would be a huge gathering.

In fact, approximately 250 Kawasaki Concours riders gathered this week in Frisco, CO, (no, Frisco is not short for San Francisco) for the Concours Owners Group 2008 National Rally. And unlike some rallies, nearly everyone rode their bikes to this event. No trailers for this group.

So, I have a Concours. I was there. I wasn’t there for very long, however. The rally started on Monday and I was starting a new job on Tuesday. Rats. So I cruised up on Monday just to say hi and shoot a few pictures.

Those Connie riders are an independent bunch, however, so efforts to get a lot of the bikes together in one place for a photo failed. Harry van der Laan, of Delfzijl, Netherlands, tried to set that up for me. Thanks just the same, Harry. Harry, by the way, is probably the Concours owner who came the farthest for the rally. He didn’t bring his bike all the way from Europe, though. He bought one here a couple years ago and stores it with Rick Hall, another local Connie rider, when he’s not here. He also makes it available to bikers from other countries who come here to ride. Nice guy.

So I had a nice ride in gorgeous weather while most folks were slaving at the office. And I did see more Connies in one place than I’ve ever seen before. And I met some nice folks.

Hey! That’s about got it covered. That’s what it’s all about, isn’t it?

Biker Quote for Today

There’s something ugly about a NEW bike on a trailer.

This may not be a big deal for most motorcyclists, but I just got highway pegs on my Kawasaki Concours. So why is it a big deal for me?

Because for many, many years there were none available. The fact that you can finally get highway pegs for a Concours is thanks to Murph, not Kawasaki. Who is Murph? Murph is a guy who has taken it upon himself to create and market a wide variety of accessories specifically for the Concours. With the first highway pegs he created for the bike you had to cut a hole through your body work, which a lot of guys did, but others were reluctant to do.

But Murph kept at it and now he has come out with a set that requires cutting through a bit of plastic underneath the body work (out of sight) but not the body work itself. You mount the main bolt to the spot where the radiator bolt normally resides, and then a bracket goes sideways from that spot and pokes out one of the vent slots on the fairing. That’s where you attach the pegs.

Now, I’m pretty handy with a wrench, but trying to get clear on what I needed to do to install these things had me bothered. Fortunately, I didn’t have to go it alone. The local chapter of the Concours Owners Group, which I recently rejoined, has a yearly tradition of meeting at Rick Hall’s place up the South St. Vrain Canyon for Wrench and Retch. Folks ride on up to Rick’s and help each other out with the work they need to do on their Connies. Steve, whose last name I didn’t get, has a 1999 Concours, same as mine, and has the same pegs, so he helped me install mine. Rick supplies the tools and the workshop. Rick also cooks up a big pot of chili each year for after the wrenching is all done.

So finally! Now I can go out on these long trips we take each year and I’ll have a way to reposition my legs. Heck, I used them on the way home. From Rick’s I went on up the St. Vrain to the Peak to Peak Highway and on home that way. It was about 75 miles and my legs were ready for some shifting long before I got home. And by gum, they work! Thanks Murph.

Biker Quote for Today

Always replace the cheapest parts first.

After 21 years Kawasaki has totally redesigned the Concours, a bike near and dear to me because I ride one. You’ve probably heard about it–it’s been in all the moto mags. All the reviews have been strongly positive, and the one thing absolutely everyone is saying is that this thing has serious power.

Now Rider magazine has published a shoot-out between four big sport tourers, the Connie, BMW K1200GT, Honda ST1300, and Yamaha FJR1300A. A side-by-side comparison strikes me as the best way to judge something like this. The bottom line is, they unanimously prefer the Honda, with the Connie coming in third. When I bought my Connie I was also interested in the ST but the price differential was too big to swallow. The ST is still more expensive than the new Connie but the difference is enough smaller that, doing it again today, I’d probably pay a little more for the ST.

Here are a few notes about the Concours 14:
Base price is about $13,000, compared to the $8,000 I paid for my 1999 in 1999.
Fuel capacity is 5.8 gallons, compared with the 7.5 gallons in my ’99.
Gas mileage is 36 mpg. I get about 45 mpg on the ’99.
Displacement is 1,352 cc vs. 996 cc on the ’99.

Plus it has all kinds of cool extras that the older models don’t have. So there is good and bad. One thing for sure, it still looks like a Concours. Here’s a shot of a ’99 model like mine and another of the Concours 14:

Oh boy, I’m excited about this one. I own a Kawasaki Concours and I just learned that the Concours Owners Group is holding their annual rally here in Colorado. It’s going to be in Frisco the week of June 2-6. I may have to rejoin the organization.

I joined COG as soon as I bought my Connie in 1999 and went for a few rides but at that point I had other buddies to ride with so I didn’t renew my membership. Now the guy who seems to have been the linch-pin in our group has moved over to the western slope and while we still go for our summer trips, the rest of us don’t get together as much to ride. I had been thinking for awhile of rejoining COG in order to find some new riding buddies.

So anyway, this rally looks like something you really have to make a commitment to. Most rallies take place over the weekend but this one is Monday to Friday. That could be the one thing that stops me from going. I’m a contractor, working on an hourly basis, and when I’m not working I’m not making money. But to be in one place with a couple thousand other folks on Connies is pretty tempting. Plus, they may be offering demo rides on the new Concours 14, the first makeover for this bike in about 18 years. All the moto-mags are calling it one of the best touring bikes you’ll find.

Don’t know at this point what I’ll do but I’m pretty buzzed!