Archive for September, 2012

Ensuring Motorcycle Safety by Using the Correct Tools

Thursday, September 6th, 2012

The following is a guest post provided by ProTool Warehouse.

sport bike

Using the correct tools helps ensure your bike is safe.

When discussing motorcycle safety, we usually only think about riding gear. There is another aspect of motorcycle safety that isn’t thought of as often though, and that is to make sure that you use the right tools when repairing your motorcycle. This is a very important part of motorcycle safety that when done correctly can help to prevent mechanical failures that could lead to an accident that could have easily been avoided. This article will touch on some of the most basic points to ensuring that you are using the correct tools to do the job.

Be Prepared for the Job Before Starting

To start, you want to make sure that your area is uncluttered and it helps to have the tools that you will need for the job set out beforehand. If you are unsure about which tools to use, you can always check with your repair manual, or find a guide online. Also, you will want to make sure that you have your motorcycle sitting safely upright, using a motorcycle wheel chock stand. If you don’t have one you can find them easily on the internet for under $200. Just make sure that you have the motorcycle locked firmly so as to avoid a tip-over when using force to remove a part or tightening and loosening nuts and bolts.

Use the Correct Sized Wrench

When using wrenches, make sure that the part of your engine that you will be working on is clean and free of oil. There have been many sore knuckles as a result of the wrench slipping off the bolt. And make sure that you always use the right size wrench that the job calls for. If it is a metric bolt head, it would be best not to substitute it with a standard sized wrench because it’s possible to strip the head of the bolt, leaving it looser than is required; not to mention that it would make the bolt harder to remove in the future.

The Benefits of Using a Torque

Speaking of tightening, it’s best to use a torque wrench when tightening nuts or bolts on your motorcycle. Your repair manual should give you the specifications of each nut and bolt. This is important because engine vibration can cause bolts to loosen if they aren’t tight enough to withstand the vibrations. If you can’t find the torque specifications in your manual, you can always call your local shop. They will be glad to help you.

Recent from National Motorcycle Examiner
More motorcycle thieves arrested thanks to LoJack

Biker Quote for Today

I always pack the bungee net. You never know when you might pick up something that needs to be strapped down.

Taking Spins On Three Victory Motorcycles

Monday, September 3rd, 2012
Victory Demo Rides 2012

Victory brought in the truck loaded with bikes and I went riding.

I did make it over to Grand Prix Motorsports to ride some Victorys, as I said I was going to, and of course it was fun and interesting. How can riding some new motorcycles not be?

But what was particularly interesting was the way the whole event was so unstructured. Maybe the ride leaders hadn’t done this sort of thing before, I don’t know. Usually you register and sign the waiver and then you sign up for particular bikes on particular rides. Before each ride the leader runs through everything you’ve already heard countless times before, such as ride staggered, no passing, no slingshotting, no wheelies, and on and on.

Not in this case. Heck, they didn’t even have the bikes lined up in any systematic way. They had about 12 bikes to ride and early on there were maybe 10 of us to ride, so at one point the leader just said, “OK, everyone pick the bike you want to ride and mount up.” As far as the rules, he pretty much just said no wheelies and he asked us to ride in a staggered formation. Not that they actually enforced that latter part. Some people did try to ride staggered but others ignored it so you were pretty much on your own.

And guys were passing. Don’t like where you are in the line? Zip on ahead to where you want to be. I’m not offering this as a criticism, I’m just remarking about it because I’ve never seen this before on a demo ride.

It got fairly comical at some points. One time we were about to head out and everyone began pulling their totally disorganized bikes into readiness. Two guys backed out of where they were and turned the opposite direction of everyone else. Are you guys blind or what? We’re not headed that direction. Finally by about the fourth ride they had decided they needed to get that part more organized so when the third ride came back they had us line the bikes up all in a row, the way you would have expected it to be done all along.

Anyway, no big deal. It was fun and I rode three bikes, a Boardwalk, A Hard-Ball, and a Hammer 8-Ball. I’m not going to rehash my take on the bikes; I’ve already done that on Examiner.com. Suffice it to say that I’m not a cruiser guy so while they were all capable machines, I won’t be buying any of them. I like my pegs underneath me, not way out front. But if you like that type of bike you might like having a Victory. My friend Randy, who accompanied me (not the Randy who left me behind out by Rifle a few weeks ago), didn’t care for the Victory Vision he rode. He said, “If I want a bike that shakes a lot I’ll buy a Harley.”

Doesn’t matter. It was fun and interesting to ride some new bikes. And sometimes when I do this I discover a bike I love. Just not this time.

Recent from National Motorcycle Examiner
More motorcycle thieves arrested thanks to LoJack

Biker Quote for Today

I Vote Like A Motorcyclist.