Progress, Not Out Of The Woods
Of course putting this new battery in couldn’t just be simple.
Joel, my mechanic, came by and checked out the V-Strom, then went and got his volt meter out of the truck. The battery was gone.
I had intended to look at my records and see when I last replaced the battery but had not done so. I looked then and found out that amazingly, this was the battery that came with the bike when I bought it in 2014. Wow.
So the charge I thought I gave it was of no use. There was enough to turn on the lights and try to turn the starter but with the reading Joel got he was surprised it could even do that.
A couple days later I got out and bought a new battery and once I got it installed (more about that in a moment) I turned the key and pushed the starter button . . . and it didn’t want to start. At first. Then it did. OK, that’s good.
Our road was still covered in ice so I couldn’t take it for a ride but on Wednesday things were clear and I figured I’d head out. I pushed the starter and it didn’t want to start. And then it did. This is not instilling me with confidence.
I was cautious about getting far from home but as I rode it and it continued to run, and in fact to run better, I did eventually take it out for a real spin. And when I got home I turned it off, opened the garage, moved Judy’s car, and then started it again to ride it in. This time it fired right up. So at this point I’m just going to keep a wary eye on it.
Besides that, while it had previously seemed like there was a fuel line leak or something, the paper I had underneath it showed no sign of a drip. Joel had checked what was on the floor of the garage and said it appeared to be coolant, not oil or gas. All in all he told me to put in a new battery and then let him know how it did and whether other problems persisted. We’ll see how that goes.
As for putting in the new battery, what a pain. Taking the old one out had been easy, just back out the bolts and lift it out. Why couldn’t putting a new one in be so simple.
The first problem was that the cable ends that connect to the battery were form-fitted to nest over the posts, but the new battery had larger posts and no nesting was going to happen. If I could have reached the vise with the cables I would have flattened them out but that was not possible, so I took pliers and bent them enough to get the metal in contact.
Next, the bolts were not long enough to reach down and thread into the nuts. I had some longer bolts but when I tried using them they were too long and I couldn’t get them tight. So I tore off some stiff paper and stuck that in the space below the bolts, to elevate the bolts, and finally was able to thread the bolts into the nuts and tighten them up. What a pain, but I’ve had to do that before so it didn’t require any new creativity.
So the V-Strom is running again. But now I’m going to be nervous every time I ride it for awhile until it proves itself trustworthy again. And what the heck is the deal with this leak and the fuel?
Biker Quote for Today
The keys to success: Waking up in the morning. Going to bed at night. Riding a motorcycle in between.
Tags: motorcycle battery
