So now I needed to do something about this hand guard that broke off when I dropped the bike recently.
A bit of electrical tape and I’ve got a functioning hand guard again.
After a good bit of searching and researching, the (now) two guys helping me found a system specifically designed to fit all models of the Suzuki DL650 (V-Strom). Emphasis on “system.” It consisted of brackets that would need to be installed on the handlebars, steel rod running from one bracket to the other, and then an actual shield to attach to the rod. And of course, this being a motorcycle part, I’m sure I was looking at a fairly high cost, though there was no price tag to look at.
While they were doing all this digging and searching, I was standing there thinking. First, a vague memory came back to me that perhaps this was not the first time this hand guard had come off. The end where it is secured to the handlebar has a bolt, and it was the part attached by the bolt that had broken. At the other end it was just a slot that slipped onto the bar. Previously I had just slipped the intact end onto the bar and propped the other end up onto where it broke off. Maybe I could do that again.
I told the guys what I was thinking and that maybe all I really needed was some black duct tape. “Or electrical tape,” one of them helpfully suggested. Good idea; electrical tape is thin while duct tape is quite wide. Thanks guys, I’m going to try this. If it doesn’t work you may see me again.
Going out to the bike I tried just slipping the guard back into place and it stayed pretty firmly. Great. Riding home it stayed in place.
At home I wound some electrical tape around it a couple times and I think it’s going to work fine. I know I had the headlight on my 1980 Honda CB750 Custom held together with electrical tape for many years and it did just fine. I think I’m good to go here.
Biker Quote for Today
In a world full of noise, the sound of my engine is my peace.
Tags: fixing motorcycle hand guard, motorcycle hand guard kludge